Description
tackyback transfer BSA CYCLES
for petrol or oil tank.
Fixing instructions for Tackyback Transfers
- Remove the release paper
- Locate transfer & squeegee firmly in position to remove air pockets
- Thoroughly soak the transfer paper with water
- Carefully remove the paper from the transfer
- It is essential to wash the transfer thoroughly with clean water to remove surplus gum
- The transfers can be put into service immediately but since any adhesive requires several days to achieve maximum bond we would not recommend pressure washing etc for at least 3 days. When cleaning with a pressure washer as with any self-adhesive product the nozzle should be kept a minimum of 600mm from the transfer.
- The water must have completely penetrated the paper before removal is attempted, re-wet if necessery. If sufficient time is ellowed the transfer paper will slide sideways with verg little effort, indicating the paper is ready for removal.
Item 5 is essential!
